Instantly Increase the Pull Power of Your Winch

Link to product: Rhino USA Recovery Snatch Block

This recovery snatch block pulley is the latest off-roading equipment brought you by the team at Rhino USA.

Built for the toughest trails, and the ultimate adventurers that roam them. A Snatch Block is not only perfect for moving heavy loads over a short distance, but also great for recovering a family member or friend that gets their vehicle stuck during a lengthy trail ride.

Check out the general specs of the Rhino USA Heavy Duty Recovery Snatch Block below.

27,056LBS Break strength

This adds a 13.5 ton break strength to your winch. Meaning you can almost instantly double the rating of your winch, when you add a Snatch Block to your setup.

Cutting edge construction

Engineered and constructed with high-tier performance in mind. This Snatch Block is crafted with a superior aerospace polymer pulley, and 6mm powder coated drop forged steel.

Works with all winches

As Rhino USA does not offer a winch on their line of products, we designed this rugged Snatch Block to handle any synthetic rope & steel cable up to 3/8 in & Common 3/4in Shackles.

Reduces heat buildup

By reducing heat build up and amperage draw, this Snatch Block will protect your synthetic rope from any potential damage caused by overheating.

Lifetime Guarantee

All of Rhino USA’s products come with a Lifetime Warranty. We believe in the strength and quality of our products and are proud to back them with this guarantee.

How to use a snatch block

There are several ways a snatch block can be used, depending on the type of recovery gear that you have and the kind of vehicle you are trying to recover:

With another vehicle:

1. Place the recovery vehicle directly across from the stuck vehicle.
2. Feed your winch cable from the recovery vehicle through the snatch block pulley.
3. Attach the snatch block to the stuck vehicle using a d-ring shackle.
4. Run the winch cable back to the recovery vehicle and begin winching slowly.
5. Tip: Multiple snatch blocks can be used in this configuration to increase the pulling power of the winch, especially if the stuck vehicle is heavier than the recovery vehicle.

Without another vehicle:

The key to using a snatch block to recover your vehicle without another vehicle present, is a recovery tree saver strap and d-ring shackles.

1. Feed your winch cable through the snatch block pulley.
2. Attach the tree saver strap securely around a tree and connect the end of the strap to the snatch block eye.
3. Run the winch hook back to your vehicle's front bumper using another d-ring shackle.
4. Tip: place a weight in the middle of your winching cable to avoid injury, in case the cable snaps.

If you are ready to take your off-road recovery game to the next level, pick up your Rhino Snatch Block today from Amazon, or right here on the Rhino USA website.

FAQ's

What Is Winch Pull Power Enhancement?

Winch pull power enhancement refers to techniques or accessories that boost the pulling capability of a winch, allowing it to exert more force and handle heavier loads. This can involve using specialized tools, gear, or attachments to optimize the winching process.

Are There Any Safety Considerations When Enhancing Winch Pull Power?

While using techniques to enhance winch pull power can be effective, it's crucial to prioritize safety. Make sure the winch, cables, and attachments are all in good condition and well-maintained. Additionally, be cautious when using the snatch block technique to prevent cable damage or potential accidents. Always follow the manufacturer's guidelines and recommended weight limits to ensure safe and effective winching. We strongly recommend checking the manufacturer's stated working load limit and max breaking strength to avoid damage or injuries. Rhino USA's recovery snatch block has a working load limit of 9,018 lbs and a max breaking strength of 27,056 lbs.